HP VPN Firewall Appliances Network Management Command Reference

305
undo summary
Default
Automatic RIPv2 summarization is enabled.
Views
RIP view
Default command level
2: System level
Usage guidelines
Automatic RIPv2 summarization can reduce the routing table size to enhance the scalability and
efficiency of large networks.
Examples
# Disable RIPv2 automatic summarization.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1] undo summary
Related commands
rip version
timers
Use timers to configure RIP timers.
Use undo timers to restore the default.
Syntax
timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout timeout-value |
update update-value }*
undo timers { garbage-collect | suppress | timeout | update } *
Default
The garbage-collect timer is 120 seconds, the suppress timer is 120 seconds, the timeout timer is 180
seconds, and the update timer is 30 seconds.
Views
RIP view
Default command level
2: System level
Parameters
garbage-collect-value: Specifies the garbage-collect timer time in seconds, in the range of 1 to 3600.
suppress-value: Specifies the suppress timer time in seconds, in the range of 0 to 3600.
timeout-value: Specifies the timeout timer time in seconds, in the range of 1 to 3600.
update-value: Specifies the update timer time in seconds, in the range of 1 to 3600.