HP VPN Firewall Appliances Network Management Command Reference

309
area (OSPF view)
Use area to create an area and enter area view.
Use undo area to remove an area.
Syntax
area area-id
undo area area-id
Default
No OSPF area is created.
Views
OSPF view
Default command level
2: System level
Parameters
area-id: Specifies an area by its ID, an IP address or a decimal integer in the range of 0 to 4294967295
that is translated into the IP address format by the system.
Examples
# Create area 0 and enter area 0 view
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]
asbr-summary
Use asbr-summary to configure a summary route on an ASBR.
Use undo asbr-summary to remove a summary route on an ASBR.
Syntax
asbr-summary ip-address { mask | mask-length } [ cost cost | not-advertise | tag tag ] *
undo asbr-summary ip-address { mask | mask-length }
Default
No ASBR route summarization is configured on an ASBR.
Views
OSPF view
Default command level
2: System level
Parameters
ip-address: Specifies the destination IP address of the summary route.