HP VPN Firewall Appliances Network Management Command Reference

314
permit-calculate-other: Calculates default routes from other routers with this keyword specified or does
not calculate default routes from other routers without this keyword specified when the router generates
a default route in a Type-5 LSA into the OSPF routing domain. If the router generates no default route in
a Type-5 LSA into the OSPF routing domain, the router calculates default routes from other routers
regardless of whether this keyword is specified.
cost cost: Specifies a cost for the default route, in the range of 0 to 16777214. If no cost is specified, the
default cost specified by the default cost command applies.
route-policy route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63
characters. When a default route exists in the routing table and the specified routing policy is matched,
the command distributes a default route in a Type-5 LSA into the OSPF routing domain, and the routing
policy modifies some values in the Type-5 LSA. If the always keyword is specified at the same time, the
command can distribute a default route in a Type-5 LSA into the OSPF routing domain when the specified
routing policy is matched, regardless of whether a default route exists in the routing table, and the routing
policy modifies some values in the Type-5 LSA.
type type: Specifies a type for the Type-5 LSA: 1 or 2. If no type is specified, the default type for the
Type-5 LSA specified by the default type command applies.
summary: Advertises the specified default route in a Type-3 LSA.
Usage guidelines
The default-route-advertise summary cost command is applicable only to VPNs. It enables a PE router
to redistribute a default external route in a Type-3 LSA to CE routers.
This command redistributes a default route in Type-5 LSA, which cannot be redistributed with the
import-route command.
Examples
# Generate a default route into the OSPF routing domain, regardless of whether the default route exists
in the routing table.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default-route-advertise always
Related commands
• default
• import-route
description (OSPF/OSPF area view)
Use description to configure a description for an OSPF process or area.
Use undo description to remove the description.
Syntax
description description
undo description
Default
No description is configured for an OSPF process or area.