HP VPN Firewall Appliances Network Management Command Reference

9
Field Descri
p
tion
Broadcast MAX-ratio
Broadcast suppression threshold as a percentage of the maximum
interface rate. When the threshold is exceeded, the interface drops
broadcast packets.
Unicast MAX-ratio
Unknown unicast suppression threshold as a percentage of the
maximum interface rate. When the threshold is exceeded, the
interface drops unknown unicast packets.
Multicast MAX-ratio
Multicast suppression threshold as a percentage of the maximum
interface rate. When the threshold is exceeded, the interface drops
multicast packets.
PVID Port VLAN ID.
Mdi type Cable type.
Port link-type Link type of the interface: access, trunk, or hybrid.
Tagged VLAN ID
VLANs for which the interface sends packets without removing VLAN
tags.
Untagged VLAN ID
VLANs for which the interface sends packets after removing VLAN
tags.
Last clearing of counters: Never
Time when the reset counters interface command was last used to clear
statistics on the interface. Never indicates that the reset counters
interface command was never used since the device was started.
Peak value of input Peak value of inbound traffic, in Bps.
Peak time of input Time of peak inbound traffic.
Peak value of output Peak value of outbound traffic, in Bps.
Peak time of output Time of peak outbound traffic.
Last 300 seconds input: 0
packets/sec 0 bytes/sec
Last 300 seconds output: 0
packets/sec 0 bytes/sec
Average rate of input and output traffic in the last 300 seconds, in pps
and Bps.
Input (total): 21322 packets,
1748554 bytes
- unicasts, - broadcasts, -
multicasts, - pauses
Inbound traffic statistics (in packets and bytes) for the interface. All
inbound normal and abnormal packets (including unicast, broadcast,
and multicast), and pause frames were counted.
Input (normal): 21322 packets, -
bytes
1268 unicasts, 7560
broadcasts, 12494 multicasts, 0
pauses
Inbound normal traffic (including unicast, broadcast, and multicast)
and pause frame statistics (in packets and bytes) for the interface.
input errors Inbound packets with errors.
runts
Inbound frames that are shorter than 64 bytes, that are in correct
format, and that contain valid CRCs.