HP VPN Firewall Appliances Network Management Command Reference

325
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, the command displays the OSPF interface information for all OSPF
processes.
Examples
# Display information about all OSPF interfaces.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
# Display OSPF information about GigabitEthernet 0/1.
<Sysname> display ospf interface gigabitethernet 0/1
OSPF Process 1 with Router ID 1.1.1.1
Interfaces
Interface: 12.1.1.11 (GigabitEthernet0/1)
Cost: 1 State: Waiting Type: Broadcast MTU: 1500
Priority: 1
Designated Router: 0.0.0.0
Backup Designated Router: 0.0.0.0
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1
LDP-sync enabled, Hold Down: 10, Max Cost: Infinite, LDP-sync State: Init
Table 68 Command output
Field Descri
p
tion
Area Area ID of the interface.
IP address Interface IP address (regardless of whether TE is enabled or not).
Type Interface network type: PTP, PTMP, Broadcast, or NBMA.