HP VPN Firewall Appliances Network Management Command Reference

326
Field Descri
p
tion
State
Interface state defined by interface state machine:
• Down—No protocol traffic is sent or received on the interface.
• Loopback—The interface is in loopback state. A loopback interface can only
collect interface information.
• Waiting—The interface starts sending and receiving Hello packets and the
router is trying to determine the identity of the (Backup) designated router for
the network.
• p-2-p—The interface will send Hello packets at the interval of HelloInterval,
and try to establish an adjacency with the neighbor.
• DR—The router itself is the designated router on the attached network.
• BDR—The router itself is the backup designated router on the attached
network.
• DROther—The router is a DROther router on the attached network.
Cost Interface cost.
Pri Router priority.
DR DR on the interface's network segment.
BDR BDR on the interface's network segment.
LDP-sync Indicates whether or not LDP-IGP synchronization is enabled.
Hold Down
Interval that the interface does not establish neighbor relationship until the LDP
session converges, in seconds.
Max Cost
Interval that OSPF advertises the maximum cost in LSAs, in seconds.
If infinite is displayed for this field, OSPF advertises the maximum cost in LSAs until
the LDP session converges.
LDP-sync State
State of LDP and OSPF synchronization:
• Achieved—Indicates that LDP and OSPF has synchronized.
• Hold Down—Indicates that the interface waits for the LDP session convergence
rather than establishing neighbor relationship.
• Max Cost—Indicates that OSPF advertises the maximum cost in LSAs.
• Init—Original state.
display ospf lsdb
Use display ospf lsdb to display LSDB information.
Syntax
display ospf [ process-id ] lsdb [ brief | [ { asbr | ase | network | nssa | opaque-area | opaque-as |
opaque-link | router | summary } [ link-state-id ] ] [ originate-router advertising-router-id |
self-originate ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level