HP VPN Firewall Appliances Network Management Command Reference

331
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, this command displays OSPF neighbor information for all OSPF
processes.
If an interface is specified, this command displays the neighbor on the interface.
If a neighbor ID is specified, this command displays detailed information about the neighbor.
If you do not provide the verbose keyword, the interface, or neighbor ID, this command displays brief
information about neighbors of the specified OSPF process or all OSPF processes.
Examples
# Display detailed OSPF neighbor information.
<Sysname> display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 1.1.1.1(GigabitEthernet0/1)'s neighbors
Router ID: 1.1.1.2 Address: 1.1.1.2 GR State: Normal
State: Full Mode: Nbr is Master Priority: 1
DR: 1.1.1.2 BDR: 1.1.1.1 MTU: 0
Dead timer due in 33 sec
Neighbor is up for 02:03:35
Authentication Sequence: [ 0 ]
Neighbor state change count: 6
LDP-sync Adjacency state: Up
Table 72 Command output
Field Descri
p
tion
Area areaID interface
IPAddress(InterfaceName)'s neighbors
Neighbor information of the interface in the specified area:
• areaID—Area to which the neighbor belongs.
• IPAddress—Interface IP address.
• InterfaceName—Interface name.
interface Interface attached with the neighbor.
Router ID Neighbor router ID.
Address Neighbor router address.
GR State GR state.