HP VPN Firewall Appliances Network Management Command Reference

333
1.1.1.2 1.1.1.2 1 40 GE0/1 Full/DR
Table 73 Command output
Field Descri
p
tion
Area Neighbor area.
Router ID Neighbor router ID.
Address Neighbor interface address.
Pri Neighboring router priority.
Dead-Time Dead interval remained.
Interface Interface connected to the neighbor.
State
Neighbor state: Down, Init, Attempt, 2-Way, Exstart, Exchange,
Loading, Full.
display ospf peer statistics
Use display ospf peer statistics to display OSPF neighbor statistics.
Syntax
display ospf [ process-id ] peer statistics [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, this command displays OSPF neighbor statistics for all OSPF processes.
Examples
# Display OSPF neighbor statistics.
<Sysname> display ospf peer statistics
OSPF Process 1 with Router ID 10.3.1.1
Neighbor Statistics
Area ID Down Attempt Init 2-Way ExStart Exchange Loading Full Total
0.0.0.0 0 0 0 0 0 0 0 1 1
0.0.0.2 0 0 0 0 0 0 0 1 1