HP VPN Firewall Appliances Network Management Command Reference

337
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
interface interface-type interface-number: Displays routes passing the specified output interface.
nexthop nexthop-address: Displays routes passing the specified next hop.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, this command displays the routing information for all OSPF processes.
Examples
# Display OSPF routing information.
<Sysname> display ospf routing
OSPF Process 1 with Router ID 192.168.1.2
Routing Tables
Routing for Network
Destination Cost Type NextHop AdvRouter Area
192.168.1.0/24 1562 Stub 192.168.1.2 192.168.1.2 0.0.0.0
172.16.0.0/16 1563 Inter 192.168.1.1 192.168.1.1 0.0.0.0
Total Nets: 2
Intra Area: 1 Inter Area: 1 ASE: 0 NSSA: 0
Table 77 Command output
Field Descri
p
tion
Destination Destination network.
Cost Cost to destination.
Type Route type: Intra-area, transit, stub, inter-area, Type-1 external, and Type-2 external.
NextHop Next hop address.
AdvRouter Advertising router.
Area Area ID.
Total Nets Total networks.