HP VPN Firewall Appliances Network Management Command Reference

338
Field Descri
p
tion
Intra Area Total intra-area routes.
Inter Area Total inter-area routes.
ASE Total ASE routes.
NSSA Total NSSA routes.
display ospf vlink
Use display ospf vlink to display OSPF virtual link information.
Syntax
display ospf [ process-id ] vlink [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, the command displays the OSPF virtual link information for all OSPF
processes.
Examples
# Display OSPF virtual link information.
<Sysname> display ospf vlink
OSPF Process 1 with Router ID 3.3.3.3
Virtual Links
Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.2.1 (GigabitEthernet0/1)
Cost: 1562 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1