HP VPN Firewall Appliances Network Management Command Reference

339
Table 78 Command output
Field Descri
p
tion
Virtual-link Neighbor-ID ID of the neighbor on the virtual link.
Neighbor-State Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, or Full.
Interface IP address and name of the local interface on the virtual link.
Cost Interface route cost.
State Interface state.
Type Type: virtual link.
Transit Area Transit area ID.
Timers Timers: Hello, dead, retransmit, and interface transmission delay.
display router id
Use display router id to display the global router ID.
Syntax
display router id [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
enable link-local-signaling
Use enable link-local-signaling to enable the OSPF link-local signaling (LLC) capability.
Use undo enable link-local-signaling to disable the OSPF link-local signaling capability.
Syntax
enable link-local-signaling