HP VPN Firewall Appliances Network Management Command Reference

340
undo enable link-local-signaling
Default
OSPF link-local signaling capability is disabled.
Views
OSPF view
Default command level
2: System level
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
enable log
Use enable log to enable specified OSPF logging.
Use undo enable log to disable specified OSPF logging.
Syntax
enable log [ config | error | state ]
undo enable log [ config | error | state ]
Default
OSPF logging is disabled.
Views
OSPF view
Default command level
2: System level
Parameters
config: Enables configuration logging.
error: Enables error logging.
state: Enables state logging.
Usage guidelines
If no keyword is specified, the command enables all logging.
Examples
# Enable OSPF logging.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] enable log