HP VPN Firewall Appliances Network Management Command Reference

341
enable out-of-band-resynchronization
Use enable out-of-band-resynchronization to enable the OSPF out-of-band resynchronization
(OOB-Resynch) capability.
Use undo enable out-of-band-resynchronization to disable the OSPF out-of-band resynchronization
capability.
Syntax
enable out-of-band-resynchronization
undo enable out-of-band-resynchronization
Default
The capability is disabled.
Views
OSPF view
Default command level
2: System level
Usage guidelines
Before you configure this command, enable the link-local signaling capability.
Examples
# Enable the out-of-band resynchronization capability for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
[Sysname-ospf-1] enable out-of-band-resynchronization
Related commands
enable link-local-signaling
filter
NOTE:
This command is only available on an ABR.
Use filter to configure OSPF to filter inbound/outbound Type-3 LSAs on an ABR.
Use undo filter to disable Type-3 LSA filtering.
Syntax
filter { acl-number | ip-prefix ip-prefix-name } { export | import }
undo filter { export | import }
Default
Type-3 LSAs filtering is disabled.