HP VPN Firewall Appliances Network Management Command Reference

342
Views
OSPF area view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number, in the range of 2000 to 3999.
ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter
inbound/outbound Type-3 LSAs. For more information about IP prefix lists, see Network Management
Configuration Guide.
export: Filters Type-3 LSAs advertised to other areas.
import: Filters Type-3 LSAs advertised into the local area.
Examples
# Use IP prefix list my-prefix-list to filter inbound Type-3 LSAs, and use ACL 2000 to filter outbound
Type-3 LSAs in OSPF Area 1.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] filter ip-prefix my-prefix-list import
[Sysname-ospf-100-area-0.0.0.1] filter 2000 export
filter-policy export (OSPF view)
Use filter-policy export to configure OSPF to filter redistributed routes.
Use undo filter-policy export to disable the filtering.
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ protocol [ process-id ] ]
undo filter-policy export [ protocol [ process-id ] ]
Default
Redistributed routes are not configured.
Views
OSPF view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter redistributed routes.
ip-prefix-name: Specifies an IP prefix list by its name, a string of 1 to 19 characters, to filter redistributed
routes.
protocol: Filters routes redistributed from the specified routing protocol, which can be direct, isis, static,
rip, ospf, or bgp. If no protocol is specified, the command filters all redistributed routes.