HP VPN Firewall Appliances Network Management Command Reference

344
filter-policy import (OSPF view)
Use filter-policy import to configure OSPF to filter routes calculated using received LSAs.
Use undo filter-policy import to disable the filtering.
Syntax
filter-policy { acl-number [ gateway ip-prefix-name ] | gateway ip-prefix-name | ip-prefix ip-prefix-name
[ gateway ip-prefix-name ] | route-policy route-policy-name } import
undo filter-policy import
Default
Routes calculated using received LSAs are not filtered.
Views
OSPF view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 to filter inbound routes by
destination.
gateway ip-prefix-name: Specifies an IP address prefix list by its name, a string of up to 19 characters, to
filter inbound routes by next hop. For more information about IP prefix lists, see Network Management
Configuration Guide.
ip-prefix ip-prefix-name: Specifies an IP address prefix list by its name, a string of up to 19 characters, to
filter inbound routes by destination. For more information about IP prefix lists, see Network Management
Configuration Guide.
route-policy route-policy-name: Specifies a routing policy, a case-sensitive string of 1 to 63 case-sensitive
characters, to filter inbound routes. For more information about routing policy, see Network
Management Configuration Guide.
Usage guidelines
To reference an advanced ACL (with a number from 3000 to 3999) in the command, configure the ACL
in one of the following ways:
• To deny/permit a route with the specified destination, use the rule [ rule-id ] { deny | permit } ip
source sour-addr sour-wildcard command.
• To deny/permit a route with the specified destination and mask, use the rule [ rule-id ] { deny |
permit } ip source sour-addr sour-wildcard destination dest-addr dest-wildcard command.
The source keyword specifies the destination address of a route and the destination keyword specifies the
subnet mask of the route. The subnet mask must be contiguous. Otherwise, the configuration does not
take effect.
Examples
# Use ACL 2000 to filter inbound routes.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255