HP VPN Firewall Appliances Network Management Command Reference

346
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | type type | tag tag |
route-policy route-policy-name ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPF does not redistribute AS-external routes from any other routing protocol.
Views
OSPF view
Default command level
2: System level
Parameters
protocol: Redistributes routes from the specified protocol, which can be bgp, direct, isis, ospf, rip, or
static.
The following matrix shows the values for the protocol argument on different firewalls and firewall
modules:
Hardware Protocol ke
y
words
F1000-A-EI/F1000-S-EI bgp, direct, ospf, rip, and static
F1000-E bgp, direct, ospf, rip, and static
F5000 bgp, direct, isis, ospf, rip, and static
F5000-S/F5000-C bgp, direct, ospf, rip, and static
VPN firewall modules direct, ospf, rip, and static
20-Gbps VPN firewall modules direct, ospf, rip, and static
process-id: Specifies an process by its ID in the range of 1 to 65535. The default is 1. It is available only
when the protocol is isis, rip, or ospf.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This keyword
takes effect only when the protocol is isis, rip, or ospf.
allow-ibgp: Allows IBGP routes redistribution. It is available only when the protocol is bgp.
cost cost: Specifies a route cost, in the range of 0 to 16777214. The default is 1.
type type: Specifies a cost type, 1 or 2. The default is 2.
tag tag: Specifies a tag for external LSAs. The default is 1.
route-policy route-policy-name: Uses the specified routing policy to filter redistributed routes. The
route-policy-name argument is a case-sensitive string of 1 to 63 characters.
Usage guidelines
OSPF prioritize routes into the following levels:
• Intra-area route
• Inter-area route
• Type-1 external route