HP VPN Firewall Appliances Network Management Command Reference

12
<Sysname> display interface gigabitethernet 0/1.1
GigabitEthernet0/1.1 current state: DOWN
IP Sending Frames' Format: PKTFMT_ETHNT_2, Hardware Address: 000f-e245-7911
Description: GigabitEthernet0/1.1 Interface
Broadcast MAX-ratio: 100%
PVID: 1
Port link-type: access
Tagged VLAN ID : none
Untagged VLAN ID : 1
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Table 5 Command output
Field Descri
p
tion
GigabitEthernet0/1.1 current state
State of the Ethernet subinterface:
• DOWN—The Ethernet subinterface is physically down (possibly
because no physical link is present or the link has failed).
• UP—The Ethernet subinterface is physically up.
IP Sending Frames' Format Frame type of the Ethernet subinterface.
Hardware Address Interface hardware address.
Broadcast MAX-ratio Broadcast storm suppression ratio.
PVID Port VLAN ID.
Tagged VLAN ID
VLANs for which the interface sends packets without removing VLAN
tags.
Untagged VLAN ID
VLANs for which the interface sends packets after removing VLAN
tags.
0 packets input, 0 bytes, 0 drops Statistics on the packets received.
0 packets output, 0 bytes, 0 drops Statistics on the packets sent.
# Display brief information about all interfaces.
<Sysname> display interface brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
GE0/0 UP UP 192.168.0.5
GE0/1 DOWN DOWN --
GE0/3 DOWN DOWN --
GE0/4 DOWN DOWN 1.1.1.2
Loop1 UP UP(s) 172.17.17.1
NULL0 UP UP(s) --
Tun1 DOWN DOWN 10.1.1.1
VT0 UP UP(s) --
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby