HP VPN Firewall Appliances Network Management Command Reference

356
[Sysname-ospf-100-area-0.0.0.1] authentication-mode simple
[Sysname-ospf-100-area-0.0.0.1] quit
[Sysname-ospf-100] quit
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospf authentication-mode simple plain abc
Related commands
authentication-mode
ospf bfd enable
Use ospf bfd enable to enable BFD for link failure detection on an OSPF interface.
Use undo ospf bfd enable to disable BFD on an OSPF interface.
Syntax
ospf bfd enable [ echo ]
undo ospf bfd enable
Default
BFD is not enabled on an OSPF interface.
Views
Interface view
Default command level
2: System level
Parameters
echo: Configures BFD single-hop echo detection. Without this keyword, this command enables BFD
bidirectional control detection.
Usage guidelines
The following matrix shows the ospf bfd enable command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
Examples
# Enable OSPF and BFD on GigabitEthernet 1/1.
<Sysname> system-view
[Sysname] ospf
[Sysname-ospf-1] area 0
[Sysname-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.255.255