HP VPN Firewall Appliances Network Management Command Reference

358
Views
Interface view
Default command level
2: System level
Parameters
priority: Specify the router priority for the interface, in the range of 0 to 255.
Usage guidelines
The greater the value, the higher the priority for DR/BDR election. If a device has a priority of 0, it will
not be elected as a DR or BDR.
Examples
# Set the router priority on GigabitEthernet 0/1 to 8.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] ospf dr-priority 8
ospf mib-binding
Use ospf mib-binding to bind an OSPF process to MIB operation for responding to SNMP requests.
Use undo ospf mib-binding to restore the default.
Syntax
ospf mib-binding process-id
undo ospf mib-binding
Default
MIB operation is bound to the OSPF process with the smallest process ID.
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
Examples
# Bind OSPF process 100 to MIB operation.
<Sysname> system-view
[Sysname] ospf mib-binding 100
# Restore the default, which means binding the OSPF process with the smallest process ID to MIB
operation.
<Sysname> system-view
[Sysname] undo ospf mib-binding