HP VPN Firewall Appliances Network Management Command Reference

370

undo snmp-agent trap enable ospf [ process-id ] [ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange |

Default

This feature is enabled.

Views

System view

Default command level

3: Manage level

Parameters

process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.

ifauthfail: Specifies information about interface authentication failures.

ifcfgerror: Specifies information about interface configuration errors.

ifrxbadpkt: Specifies information about error packets received.

ifstatechange: Specifies information about interface state changes.

iftxretransmit: Specifies information about packet receiving and forwarding.

lsdbapproachoverflow: Specifies information about cases approaching LSDB overflow.

lsdboverflow: Specifies LSDB overflow information.

maxagelsa: Specifies LSA max age information.

nbrstatechange: Specifies information about neighbor state changes.

originatelsa: Specifies information about LSAs originated locally.

vifauthfail: Specifies information about virtual interface authentication failures.

vifcfgerror: Specifies information about virtual interface configuration errors.

virifauthfail: Specifies information about virtual interface authentication failures.

virifrxbadpkt: Specifies information about error packets received by virtual interfaces.

virifstatechange: Specifies information about virtual interface state changed.

viriftxretransmit: Specifies information about virtual interface packet retransmission.

virnbrstatechange: Specifies information about virtual interface neighbor state changed.

Usage guidelines

If no process is specified, the command enables the sending of SNMP traps for all OSPF processes.

For related information, see System Management and Maintenance Command Reference.

Examples

# Enable the sending of SNMP traps for OSPF process 1.

<Sysname> system-view

[Sysname] snmp-agent trap enable ospf 1