HP VPN Firewall Appliances Network Management Command Reference

376
IS-IS commands
The term "router" in this document refers to both routers and routing-capable firewalls and firewall
modules.
The following matrix shows the feature and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules No
area-authentication-mode
Use area-authentication-mode to specify the area authentication mode and a password.
Use undo area-authentication-mode to restore the default.
Syntax
area-authentication-mode { md5 | simple } [ cipher ] password [ ip | osi ]
undo area-authentication-mode
Default
No area authentication is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext password. If this keyword is not specified, you set a plaintext password.
password: Sets the password. This argument is case sensitive. It must be a plaintext string of 1 to 16
characters, or a ciphertext string of 33 to 53 characters.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.