HP VPN Firewall Appliances Network Management Command Reference

378
Table 79 Automatic cost calculation scheme for cost styles other than wide and wide-compatible
Interface bandwidth Cost
≤10 Mbps 60
≤100 Mbps 50
≤155 Mbps 40
≤622 Mbps 30
≤2500 Mbps 20
>2500 Mbps 10
Examples
# Enable automatic link cost calculation.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] auto-cost enable
Related commands
• bandwidth-reference
• cost-style
bandwidth-reference (IS-IS view)
Use bandwidth-reference to set the bandwidth reference value for automatic link cost calculation.
Use undo bandwidth-reference to restore the default.
Syntax
bandwidth-reference value
undo bandwidth-reference
Default
The bandwidth reference value is 100 Mbps.
Views
IS-IS view
Default command level
2: System level
Parameters
value: Bandwidth reference value in Mbps, ranging from 1 to 2147483648.
Examples
# Configure the bandwidth reference of IS-IS process 1 as 200 Mbps.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] bandwidth-reference 200