HP VPN Firewall Appliances Network Management Command Reference

380
Syntax
cost-style { narrow | wide | wide-compatible | { compatible | narrow-compatible } [ relax-spf-limit ] }
undo cost-style
Default
Only narrow cost style packets can be received and sent.
Views
IS-IS view
Default command level
2: System level
Parameters
narrow: Receives and sends only narrow cost style packets. The narrow cost ranges from 0 to 63.
wide: Receives and sends only wide cost style packets. The wide cost ranges from 0 to 16777215.
compatible: Receives and sends both wide and narrow cost style packets.
narrow-compatible: Receives both narrow and wide cost style packets, but sends only narrow cost style
packets.
wide-compatible: Receives both narrow and wide cost style packets, but sends only wide cost style
packets.
relax-spf-limit: Allows receiving routes with a cost greater than 1023. If this keyword is not specified, any
route with a cost higher than 1023 is discarded. This keyword is only available when compatible or
narrow-compatible is included.
Examples
# Configure the router to send only narrow cost style packets, but receive both narrow and wide cost style
packets.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] cost-style narrow-compatible
Related commands
• circuit-cost
• isis cost
default-route-advertise (IS-IS view)
Use default-route-advertise to advertise a default route of 0.0.0.0/0.
Use undo default-route-advertise to disable default route advertisement.
Syntax
[ ipv4-unicast topology-name ] default-route-advertise [ route-policy route-policy-name | [ level-1 |
level-1-2 | level-2 ] ] *
undo [ ipv4-unicast topology-name ] default-route-advertise [ route-policy route-policy-name ]
Default
Default route advertisement is disabled.