HP VPN Firewall Appliances Network Management Command Reference

381
Views
IS-IS view
Default command level
2: System level
Parameters
ipv4-unicast: Specifies an IPv4 unicast topology.
topology-name: Topology name, a case-sensitive character string of 1 to 31 characters.
route-policy-name: Specifies the name of a routing policy, a case-sensitive string of 1 to 63 characters.
level-1: Advertises a Level-1 default route.
level-1-2: Advertises both Level-1 and Level-2 default routes.
level-2: Advertises a Level-2 default route.
Usage guidelines
If no level is specified, a Level-2 default route is advertised.
The Level-1 default route is advertised to other routers in the same area, and the Level-2 default route is
advertised to all the Level-2 and Level-1-2 routers.
If no topology is specified, the default route is advertised in the base topology.
Using the apply isis level-1 command in routing policy view will generate a default route in a Level-1 LSP.
Using the apply isis level-2 command in routing policy view will generate a default route in a Level-2 LSP.
Using the apply isis level-1-2 command in routing policy view will generate a default route in a Level-1 LSP
and Level-2 LSP.
Examples
# Advertise a Level-2 default route.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] default-route-advertise
display isis brief
Use display isis brief to view IS-IS brief configuration information.
Syntax
display isis brief [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Displays IS-IS brief configuration information for the IS-IS process. The process ID is in the
range of 1 to 65535.