HP VPN Firewall Appliances Network Management Command Reference

383
Field Descri
p
tion
Timers
Timers:
• lsp-max-age—Maximum life period of LSP.
• lsp-refresh—Refresh interval of LSP.
• Interval between SPFs—Interval between SPF
calculations.
IPv4-Unicast
voice(4000): Enable
video(500): Disable
Voice and video refer to the topology names.
4000 and 500 refer to the topology numbers.
IPv6-Unicast IPv6 unicast topology.
display isis debug-switches
Use display isis debug-switches to display IS-IS debugging switch state.
Syntax
display isis debug-switches { process-id | vpn-instance vpn-instance-name } [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Displays the IS-IS debugging switch state for the IS-IS process. The ID is in the range of 1 to
65535.
vpn-instance vpn-instance-name: Displays the IS-IS debugging switch state for the VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
debugging switch state for the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the debugging switch state of IS-IS process 1.
<Sysname> display isis debug-switches 1
IS-IS - Debug settings.
IS-IS SPF Triggering Events debugging is on