HP VPN Firewall Appliances Network Management Command Reference

388
Field Descri
p
tion
Max Cost Time
Interval that IS-IS advertises the maximum cost in LSAs, in seconds.
If infinite is displayed for this field, IS-IS advertises the maximum cost in
LSAs until the LDP session converges.
LDP-sync State
Status of LDP and IS-IS synchronization:
• Achieved—Indicates that LDP and IS-IS has synchronized.
• Hold Down—Indicates that the interface waits for the LDP session
convergence rather than establishing neighbor relationship.
• Max Cost—Indicates that IS-IS advertises the maximum cost in LSAs.
• Init—Original state.
"L12" indicates that the of Level-1 and Level-2 routes have the same LDP
synchronization state on a non-broadcast interface.
# Display IS-IS interface statistics.
<sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down IPv6 Up/Down
LAN 0/1 -/-
P2P 4/0 -/-
Table 83 Command output
Field Descri
p
tion
Type
Network type of the interface:
• LAN for broadcast network.
• P2P for point-to-point network.
IPv4 UP Number of IS-IS interfaces in up state.
IPv4 DOWN Number of IS-IS interfaces in down state.
IPv6 UP
Number of IS-ISv6 interfaces in up state. If IPv6 is not enabled, this field
displays a hyphen (-).
IPv6 DOWN
Number of IS-ISv6 interfaces in down state. If IPv6 is not enabled, this
field displays a hyphen (-).
display isis lsdb
Use display isis lsdb to display IS-IS link state database.
Syntax
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] | [ lsp-id lspid | lsp-name lspname ] | local | verbose ]
* [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level