HP VPN Firewall Appliances Network Management Command Reference

391
3.1.1.0 255.255.255.0 COST: 10
IPV4 UNICAST
3.1.1.0 255.255.255.0 COST: 10 MTR ID: 10
IPV6 UNICAST
3::/64 COST: 10 MTR ID: 2
1000.0000.0002.01-00 0x00000003 0x1d9b 878 55 0/0/0
SOURCE 1000.0000.0002.01
NLPID IPV4
NLPID IPV6
+NBR ID
1000.0000.0002.00 COST: 0
+NBR ID
1000.0000.0001.00 COST: 0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
Table 84 Command output
Field Descri
p
tion
LSPID Link state packet ID.
Seq Num LSP sequence number.
Checksum LSP checksum.
Holdtime LSP lifetime which decreases as time elapses.
Length LSP length.
ATT/P/OL
• ATT—Attach bit.
• P—Partition bit.
• OL—Overload bit.
1 means the LSP bit is set and 0 means the LSP bit is not set.
SOURCE System ID of the originating router.
NLPID Network layer protocol the originating router runs.
AREA ADDR Area address of the originating router.
INTF ADDR IP address of the originating router's IS-IS interface.
INTF ADDR V6 IPv6 address of the originating router's IS-ISv6 interface.
NBR ID Neighbor ID of the originating router.
IP-Internal Internal IP address and mask of the originating router.
IP-External External IP address and mask of the originating router.
IP-Extended Extended IP address and mask of the originating router.
COST Cost.
HOST NAME Dynamic host name of the originating router.
ORG ID Original system ID of the virtual system ID of the originating router.
Auth Authentication information of the originating router.
IPV6 Internal IPv6 address and prefix of the originating router.
IPV6-Ext External IPv6 address and prefix of the originating router.