HP VPN Firewall Appliances Network Management Command Reference

392
Field Descri
p
tion
MTR ID 00 0/0/0
MTR ID 10 0/0/0
MTR ID 02 0/0/0
Topology number supported by the originating router:
• 00—Means base topology.
• 02—Means IPv6 unicast topology.
• 10—Means IPv4 unicast topology.
• 0/0/0—Indicates ATT/P/OL.
IPV4 UNICAST NBR ID IPv4 unicast neighbor information of the originating router.
IPV6 UNICAST NBR ID IPv6 unicast neighbor information of the originating router.
IPV4 UNICAST
IP-Internal
IPv4 unicast internal reachability information of the originating router.
IPV6 UNICAST IPv6 unicast internal reachability information of the originating router.
IPV4 UNICAST
IP-External
IPv4 unicast external reachability information of the originating router.
IPV6 UNICAST-Ext IPv6 unicast external reachability information of the originating router.
display isis mesh-group
Use display isis mesh-group to display IS-IS mesh-group configuration information.
Syntax
display isis mesh-group [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Displays IS-IS mesh-group configuration information for the IS-IS process. The ID is in the
range of 1 to 65535.
vpn-instance vpn-instance-name: Displays IS-IS mesh-group configuration information for the VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS
mesh-group configuration information for the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Add GigabitEthernet 1/1 and GigabitEthernet 1/2 to mesh-group 100.
<Sysname> system-view