HP VPN Firewall Appliances Network Management Command Reference

16
Field Descri
p
tion
OAM connection failure
The OAM connection failed (possibly because the connection failed to be
established or the connection is disconnected).
DLDP connection failure
The DLDP connection failed (possibly because the connection failed to be
established or the connection is disconnected).
Loopback detection-protected The interface is shut down because a loop was detected on it.
BPDU-protected The interface is shut down by the BPDU guard function.
Monitor-Link uplink down The uplink of the monitor link group to which the interface belongs is down.
Related commands
interface
display jumboframe
Use display jumboframe to display the current jumbo frame support status of the device and the support
status after a reboot.
Syntax
display jumboframe [ | { begin | exclude | include } regular-expression ]
Default
The device does not allow jumbo frames to pass through Layer 2 Ethernet interfaces.
Views
Any view
Default command level
2: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is supported only on the Ten-GigabitEthernet interface of a firewall module.
The following matrix shows the display jumboframe command and hardware compatibility:
Hardware Com
p
atibilit
y
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 No