HP VPN Firewall Appliances Network Management Command Reference

17
Hardware Com
p
atibilit
y
F5000-S/F5000-C No
VPN firewall modules No
20-Gbps VPN firewall modules Yes
Examples
# Display the current jumboframe support status of the device and the support status after a reboot.
<Sysname> display jumboframe
jumboframe mode is disable.
jumboframe mode will be enable after reboot.
Related commands
jumboframe enable
duplex
Use duplex to set the duplex mode for an Ethernet interface.
Use undo duplex to restore the default duplex mode of the Ethernet interface.
Syntax
duplex { auto | full | half }
undo duplex
Default
Ethernet interfaces operate in autonegotiation mode.
Views
Ethernet interface view
Default command level
2: System level
Parameters
auto: Sets the interface to operate in autonegotiation mode.
full: Sets the interface to operate in full duplex mode.
half: Sets the interface to operate in half duplex mode.
Examples
# Configure interface GigabitEthernet 0/1 to operate in full duplex mode.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] duplex full
flow-control
Use flow-control to enable TxRx mode generic flow control on an Ethernet interface.
Use undo flow-control to disable generic flow control on the Ethernet interface.