HP VPN Firewall Appliances Network Management Command Reference

410
Usage guidelines
If no level is specified, the command enables IS-IS LSP flash flooding for both Level-1 and Level-2.
Examples
# Enable fast flooding and specify the maximum LSPs to be sent as 10 and the delay time as 100
milliseconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] flash-flood flood-count 10 max-timer-interval 100
import-route (IS-IS view)
Use import-route to redistribute routes from another routing protocol or another IS-IS process.
Use undo import-route to disable route redistribution from another routing protocol or another IS-IS
process.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | cost-type { external |
internal } | [ level-1 | level-1-2 | level-2 ] | route-policy route-policy-name | tag tag ] *
undo import-route protocol [ process-id | all-processes ]
Default
No route redistribution is configured.
Views
IS-IS view
Default command level
2: System level
Parameters
protocol: Redistributes routes from a routing protocol, which can be BGP, direct, IS-IS, OSPF, RIP or static.
process-id: Process ID, in the range of 1 to 65535. It is available only when the protocol is IS-IS, OSPF
or RIP.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This keyword
takes effect only when the protocol is rip, ospf, or isis.
allow-ibgp: Allows redistribution of IBGP routes. It is available when the protocol is BGP.
cost: Specifies a cost for redistributed routes.
The range of the cost depends on its style:
• For the styles of narrow, narrow-compatible, and compatible, the cost ranges from 0 to 63.
• For the styles of wide, wide-compatible, the cost ranges from 0 to 16777215.
cost-type { external | internal }: Specifies the cost type. The internal type indicates internal routes, and
the external type indicates external routes. If external is specified, the cost of a redistributed route to be
advertised is added by 64 to make internal routes take priority over external routes. The type is external
by default. The keywords are available only when the cost type is narrow, narrow-compatible, or
compatible.
level-1: Redistributes routes into the Level-1 routing table.