HP VPN Firewall Appliances Network Management Command Reference

420
Views
Interface view
Default command level
2: System level
Parameters
mesh-group-number: Mesh group number, ranging from 1 to 4294967295.
mesh-blocked: Blocks the interface, which sends LSPs only after receiving LSP requests.
Usage guidelines
For an interface not in a mesh group, it follows the normal process to flood the received LSPs to other
interfaces. For the NBMA network with high connectivity and multiple point-to-point links, this will cause
repeated LSP flooding and bandwidth waste.
After an interface is added to a mesh group, it only floods a received LSP or a generated LSP to interfaces
not belonging to the same mesh group.
If you block an interface, the interface can send LSPs only after receiving LSP requests.
The mesh-group feature is only available for a point-to-point link interface.
Examples
# Add the frame relay subinterface Virtual-Template 1 to mesh-group 3.
<Sysname> system-view
[Sysname] interface Virtual-Template1
[Sysname-Virtual-Template1] isis mesh-group 3
isis mib-binding
Use isis mib-binding to bind MIBs with an IS-IS process.
Use undo isis mib-binding to restore the default.
Syntax
isis mib-binding process-id
undo isis mib-binding
Default
MIBs are bound with IS-IS process 1.
Views
System view
Default command level
2: System level
Parameters
process-id: IS-IS process ID, in the range of 1 to 65535.
Examples
# Bind MIBs with IS-IS process 100.
<Sysname> system-view