HP VPN Firewall Appliances Network Management Command Reference

440
timer lsp-refresh
Use timer lsp-refresh to configure the LSP refresh interval.
Use undo timer lsp-refresh to restore the default.
Syntax
timer lsp-refresh seconds
undo timer lsp-refresh
Default
The default LSP refresh interval is 900 seconds.
Views
IS-IS view
Default command level
2: System level
Parameters
seconds: LSP refresh interval in seconds, ranging from 1 to 65534.
Usage guidelines
To refresh LSPs before they are aged out, the interval configured by the timer lsp-refresh command must
be smaller than that configured by the timer lsp-max-age command.
Examples
# Configure the LSP refresh interval as 1500 seconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] timer lsp-refresh 1500
Related commands
timer lsp-max-age
timer spf
Use timer spf to set the SPF calculation interval.
Use undo timer spf to restore the default.
Syntax
timer spf maximum-interval [ initial-interval [ second-wait-interval ] ]
undo timer spf
Default
The IS-IS SPF calculation interval is 10 seconds.
Views
IS-IS view