HP VPN Firewall Appliances Network Management Command Reference

480
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] filter-policy 2000 import
# Configure ACL 3000 to permit only route 113.0.0.0/16 to pass, and reference ACL 3000 to filter
incoming route information.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0
[Sysname-acl-adv-3000] rule 100 deny ip
[Sysname-acl-adv-3000] quit
[Sysname] bgp 100
[Sysname-bgp] filter-policy 3000 import
group (BGP/BGP-VPN instance view)
Use group to create a peer group.
Use undo group to delete a peer group.
Syntax
group group-name [ external | internal ]
undo group group-name
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
external: Creates an EBGP peer group, which can be the group of another sub AS in a confederation.
internal: Creates an IBGP peer group.
Usage guidelines
An IBGP peer group is created if neither internal nor external is specified.
Examples
# In BGP view, create an EBGP peer group test with AS number 200, and add EBGP peers 10.1.1.1 and
10 .1. 2.1 i n t o t h e g r o u p .
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer test as-number 200
[Sysname-bgp] peer 10.1.1.1 group test
[Sysname-bgp] peer 10.1.2.1 group test
# In BGP-VPN instance view, create an EBGP peer group test with AS number 200, and add EBGP peers
10 .1.1.1 a n d 10 .1. 2 .1 i n t o t h e g r o u p . ( T h e V P N h a s b e e n c r e a t e d . )
<Sysname> system-view