HP VPN Firewall Appliances Network Management Command Reference

492
peer capability-advertise orf
Use peer capability-advertise orf to enable the ORF capability for a BGP peer or peer group.
Use undo peer capability-advertise orf to disable the ORF capability for the BGP peer or peer group.
Syntax
peer { group-name | ip-address } capability-advertise orf ip-prefix { both | receive | send }
undo peer { group-name | ip-address } capability-advertise orf ip-prefix { both | receive | send }
Default
The ORF capability is not enabled for a BGP peer or peer group.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies IP address of a peer.
both: Supports sending and receiving route-refresh messages carrying the ORF information.
receive: Supports receiving route-refresh messages carrying the ORF information.
send: Supports sending route-refresh messages carrying the ORF information.
Usage guidelines
• After you enable the ORF capability, the local BGP router negotiates the ORF capability with the
BGP peer through Open messages. After that, the BGP router can exchange ORF information in
route-refresh messages with the peer. For non-standard ORF capability negotiation, you need also
to configure the peer capability-advertise orf non-standard command.
• After you disable the ORF capability, the local BGP router does not negotiate the ORF capability
with the specified peer or peer group.
Table 104 Description of the both, send, and receive parameters and the negotiation result
Local
p
arameter Peer
p
arameter Ne
g
otiation result
send
• receive
• both
The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the peer.
receive
• send
• both
The ORF receiving capability is enabled locally and
the ORF sending capability is enabled on the peer.
both both
Both the ORF sending and receiving capabilities are
enabled locally and on the peer.
Examples
# Enable the ORF capability for the BGP peer 18.10.0.9. Then, after negotiation, the local router can
exchange ORF information with the peer 18.10.0.9.
<Sysname> system-view
[Sysname] bgp 100