HP VPN Firewall Appliances Network Management Command Reference

498
ip-address: Specifies the IP address of a peer.
description-text: Specifies the description information for the peer/peer group, a string of 1 to 79
characters.
Usage guidelines
Create a peer/peer group before configuring a description for it.
Examples
# In BGP view, configure the description information of the peer group test as ISP1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test description ISP1
# In BGP-VPN instance view, configure the description information of the peer group test as ISP1. (The
VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test description ISP1
Related commands
display bgp peer
peer ebgp-max-hop (BGP/BGP-VPN instance view)
Use peer ebgp-max-hop to allow establishing an EBGP session with a peer or peer group that is on an
indirectly connected network.
Use undo peer ebgp-max-hop to restore the default.
Syntax
peer { group-name | ip-address } ebgp-max-hop [ hop-count ]
undo peer { group-name | ip-address } ebgp-max-hop
Default
This feature is disabled.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
hop-count: Specifies the maximum hop count, in the range of 1 to 255. The default is 64.
Usage guidelines
You can use the argument hop-count to specify the maximum route hop count of the EBGP session.