HP VPN Firewall Appliances Network Management Command Reference

515
Syntax
preference { external-preference internal-preference local-preference | route-policy route-policy-name }
undo preference
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
external-preference: Preference of EBGP routes, in the range of 1 to 255.
internal-preference: Preference of IBGP routes, in the range of 1 to 255.
local-preference: Preference of local routes, in the range of 1 to 255.
route-policy-name: Routing policy name, a case-sensitive string of 1 to 63 characters. Using the routing
policy can set a preference for routes matching it. The default value applies to routes not matching the
routing policy.
Usage guidelines
For external-preference, internal-preference, and local-preference, the greater the preference value is, the
lower the preference is, and the default values are 255, 255, and 130, respectively.
Examples
# In BGP view, configure preferences for EBGP, IBGP and local routes as 20, 20, and 200.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] preference 20 20 200
# In BGP-VPN instance view, configure preferences for EBGP, IBGP and local routes as 20, 20, and 200.
(The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] preference 20 20 200
reflect between-clients (BGP view/BGP-VPN instance view)
Use reflect between-clients to enable route reflection between clients.
Use undo reflect between-clients to disable this function.
Syntax
reflect between-clients
undo reflect between-clients
Default
Route reflection between clients is enabled.
Views
BGP view, BGP-VPN instance view