HP VPN Firewall Appliances Network Management Command Reference

521
Use undo router-id to remove the router ID.
Syntax
router-id router-id
undo router-id
Default
A BGP router uses the global router ID. You can execute the router id command in system view to
configure the global router ID.
Views
BGP view
Default command level
2: System level
Parameters
router-id: Router ID in IP address format.
Usage guidelines
To run BGP protocol, a router must have a router ID, which is an unsigned 32-bit integer, the unique ID
of the router in the AS.
To enhance network reliability, you can specify the IP address of a local loopback interface as the router
ID.
Examples
# Specifies the router ID as 10.18.4.221.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] router-id 10.18.4.221
Related commands
router id
summary automatic
Use summary automatic to enable automatic summarization for redistributed subnets.
Use undo summary automatic to disable automatic summarization.
Syntax
summary automatic
undo summary automatic
Default
Automatic summarization is disabled.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level