HP VPN Firewall Appliances Network Management Command Reference

549
Field Descri
p
tion
apply output-interface Specify the output interface.
if-match acl
Use if-match acl to configure an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.
Syntax
if-match acl acl-number
undo if-match acl
Views
Policy node view
Default command level
2: System level
Parameters
acl-number: Specifies the ACL number, in the range of 2000 to 3999. The number of a basic ACL ranges
from 2000 to 2999 and that of an advanced ACL ranges from 3000 to 3999.
Examples
# Permit the packets matching ACL 2010.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] if-match acl 2010
if-match packet-length
Use if-match packet-length to define a packet length match criterion.
Use undo if-match packet-length to remove the match criterion.
Syntax
if-match packet-length min-len max-len
undo if-match packet-length
Views
Policy node view
Default command level
2: System level
Parameters
min-len: Specifies the minimum IP packet length in bytes, in the range of 0 to 65535.
max-len: Specifies the maximum IP packet length in bytes, in the range of 1 to 65535. The value of
max-len must be no less than that of min-len.