HP VPN Firewall Appliances Network Management Command Reference

557
Table 116 Major values of the flags field (after the colon)
Value Meanin
g
0
Indicates that the entry does not belong to the main board, or the main board
has synchronized the entry to other cards.
1
Indicates that the main board will synchronize the incoming interface
information of the entry to other cards.
2
Indicates that the main board will synchronize the outgoing interface
information of the entry to other cards.
4
Indicates that the main board will synchronize the RP information of the entry
to other cards.
80
Indicates that the main board will synchronize the encapsulation group
information of the entry to other cards.
80000000 Indicates that the main board will notify other cards to add the entry.
40000000 Indicates that the main board will notify other cards to remove the entry.
Related commands
• display multicast routing-table
• multicast forwarding-table downstream-limit
• multicast forwarding-table route-limit
display multicast routing-table
Use display multicast routing-table to display multicast routing table information.
Syntax
display multicast routing-table [ source-address [ mask { mask | mask-length } ] | group-address [ mask
{ mask | mask-length } ] | incoming-interface { interface-type interface-number | register } |
outgoing-interface { exclude | include | match } { interface-type interface-number | register } ] * [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the mask length of the multicast group address or multicast source address. For a
multicast group address, this argument has an effective value range of 4 to 32. For a multicast source
address, this argument has an effective value range of 0 to 32. The default is 32 in both cases.