HP VPN Firewall Appliances Network Management Command Reference

559
Field Descri
p
tion
Uptime
Length of time for which the (S, G) entry has been up, in the format
hh:mm:ss.
Upstream interface
Upstream interface the (S, G) entry: multicast packets should arrive at
this interface.
List of 2 downstream interfaces
Downstream interface list: these interfaces need to forward multicast
packets.
Related commands
display multicast forwarding-table
display multicast routing-table static
Use display multicast routing-table static to display information about static multicast routes.
Syntax
display multicast routing-table static [ source-address { mask-length | mask } ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
source-address: Specifies a multicast source address.
mask: Specifies the mask of the multicast source address.
mask-length: Specifies the mask length of the multicast source address, in the range of 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all the static multicast routes on the public network.
<Sysname> display multicast routing-table static
Multicast Routing Table of VPN-Instance: public net
Routes : 1
Mroute 10.10.0.0/16
Interface = GigabitEthernet0/1 RPF Neighbor = 2.2.2.2
Matched routing protocol = <none>, Route-policy = <none>
Preference = 1, Order = 1