HP VPN Firewall Appliances Network Management Command Reference

560
Running Configuration = ip rpf-route-static 10.10.0.0 16 2.2.2.2 order 1
Table 118 Command output
Field Descri
p
tion
Multicast Routing Table of
VPN-Instance: public net
Multicast routing table for the public network.
Mroute Multicast route source address and its mask length.
Interface Outgoing interface to the multicast source.
RPF Neighbor
IP address of the RPF neighbor through which the multicast source is
reachable.
Route-policy
Routing policy. The multicast source address of the route should match
the routing policy.
Preference Route preference.
Order Sequence number of the route.
Running Configuration Command line that configures the static multicast route.
display multicast rpf-info
Use display multicast rpf-info to display the RPF information of a multicast source.
Syntax
display multicast rpf-info source-address [ group-address ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all the RPF information of multicast source 192.168.1.55 on the public network.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
VPN instance: public net