HP VPN Firewall Appliances Network Management Command Reference

566
Default
The maximum number of downstream nodes for a single multicast forwarding entry is 128.
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of downstream nodes (namely, the maximum number of outgoing
interfaces) for a single multicast forwarding entry. The value ranges from 0 to 128.
Examples
# Set the maximum number of downstream nodes for a single multicast forwarding entry on the public
network to 120.
<Sysname> system-view
[Sysname] multicast forwarding-table downstream-limit 120
Related commands
display multicast forwarding-table
multicast forwarding-table route-limit
Use multicast forwarding-table route-limit to configure the maximum number of entries in the multicast
forwarding table.
Use undo multicast forwarding-table route-limit to restore the maximum number of entries in the
multicast forwarding table to the system default.
Syntax
multicast forwarding-table route-limit limit
undo multicast forwarding-table route-limit
Default
The maximum number of entries in the multicast forwarding table is 4096.
Views
System view
Default command level
2: System level
Parameters
limit: Specifies the maximum number of entries in the multicast forwarding table. The value ranges from
0 to 4096.
Examples
# Set the maximum number of entries in the multicast forwarding table on the public network to 200.
<Sysname> system-view
[Sysname] multicast forwarding-table route-limit 200