HP VPN Firewall Appliances Network Management Command Reference

571
IGMP commands
The term "router" in this document refers to both routers and routing-capable firewalls.
display igmp group
Use display igmp group to display IGMP group information.
Syntax
display igmp group [ group-address | interface interface-type interface-number ] [ static | verbose ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
group-address: Specifies a multicast group address, in the range of 224.0.1.0 to 239.255.255.255. If
you do not specify this argument, the command displays the IGMP group information of all multicast
groups.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, this command displays the IGMP group information on all interfaces.
static: Specifies IGMP groups that the interface statically joined. If you do not specify this keyword, the
command displays information about the IGMP groups that the interface dynamically joined.
verbose: Displays detailed information of IGMP groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the IGMP groups that all interfaces joined on the public network.
<Sysname> display igmp group
Total 3 IGMP Group(s).
Interface group report information of VPN-Instance: public net
GigabitEthernet0/1(10.10.1.20):
Total 3 IGMP Groups reported
Group Address Last Reporter Uptime Expires
225.1.1.1 10.10.1.10 00:02:04 00:01:15
225.1.1.3 10.10.1.10 00:02:04 00:01:15