HP VPN Firewall Appliances Network Management Command Reference

588
[Sysname-acl-basic-2005] quit
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp group-policy 2005
Related commands
group-policy (IGMP-snooping view)
igmp host-tracking
Use igmp host-tracking to enable the IGMP host tracking function on an interface.
Use undo igmp host-tracking to disable the IGMP host tracking function on an interface
Syntax
igmp host-tracking
undo igmp host-tracking
Default
This function is disabled.
Views
Interface view
Default command level
2: System level
Examples
# Enable the IGMP host tracking function on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp host-tracking
Related commands
host-tracking
igmp last-member-query-interval
Use igmp last-member-query-interval to configure the last-member query interval, namely, the length of
time that the device waits between sending IGMP group-specific queries, on the current interface.
Use undo igmp last-member-query-interval to restore the default.
Syntax
igmp last-member-query-interval interval
undo igmp last-member-query-interval
Default
The IGMP last-member query interval is 1 second.
Views
Interface view