HP VPN Firewall Appliances Network Management Command Reference

589
Default command level
2: System level
Parameters
interval: Specifies an IGMP last-member query interval in seconds, in the range of 1 to 5.
Examples
# Set the IGMP last-member query interval to 3 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp last-member-query-interval 3
Related commands
• display igmp interface
• igmp robust-count
• last-member-query-interval
igmp max-response-time
Use igmp max-response-time to configure the maximum response time for IGMP general queries on the
current interface.
Use undo igmp max-response-time to restore the default.
Syntax
igmp max-response-time interval
undo igmp max-response-time
Default
The maximum response time for IGMP general queries is 10 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies the maximum response time in seconds for IGMP general queries, in the range of 1 to
25.
Examples
# Set the maximum response time for IGMP general queries to 8 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp max-response-time 8
Related commands
• display igmp interface
• igmp timer other-querier-present
• max-response-time