HP VPN Firewall Appliances Network Management Command Reference

592
Default
The IGMP querier's robustness variable is 2.
Views
Interface view
Default command level
2: System level
Parameters
robust-value: IGMP querier's robustness variable, in the range of 2 to 5.
Usage guidelines
The IGMP querier's robustness variable defines the maximum number of attempts for transmitting IGMP
general queries, group-specific queries or group-and-source-specific queries in case of packet loss due to
network problems. A higher robustness variable makes the IGMP querier more robust, but results in
longer multicast group timeout time.
The IGMP querier's robustness variable determines the following values:
• The default number of general queries that the IGMPv1/v2/v3 querier sends on startup
• The number of IGMP group-specific queries that the IGMPv2 querier sends after receiving an IGMP
leave message
• The number of IGMP group-and-source-specific queries that the IGMPv3 querier sends after
receiving an IGMP report that indicates relation changes between IPv6 multicast groups and IPv6
multicast sources
Examples
# Set the IGMP querier's robustness variable to 3 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0//1
[Sysname-GigabitEthernet0/1] igmp robust-count 3
Related commands
• display igmp interface
• igmp last-member-query-interval
• igmp startup-query-count
• igmp timer other-querier-present
• igmp timer query
• robust-count
igmp send-router-alert
Use the igmp send-router-alert command on the current interface to enable insertion of the Router-Alert
option in IGMP messages to be sent.
Use the undo igmp send-router-alert command on the current interface to disable insertion of the
Router-Alert option in IGMP messages to be sent.
Syntax
igmp send-router-alert