HP VPN Firewall Appliances Network Management Command Reference

593
undo igmp send-router-alert
Default
IGMP messages are sent with the Router-Alert option.
Views
Interface view
Default command level
2: System level
Examples
# Disable insertion of the Router-Alert option into IGMP messages that leave GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] undo igmp send-router-alert
Related commands
• igmp require-router-alert
• send-router-alert
igmp ssm-mapping enable
Use igmp ssm-mapping enable to enable the IGMP SSM mapping feature on the current interface.
Use undo igmp ssm-mapping enable to disable the IGMP SSM mapping feature on the current interface.
Syntax
igmp ssm-mapping enable
undo igmp ssm-mapping enable
Default
The IGMP SSM mapping feature is disabled on all interfaces.
Views
Interface view
Default command level
2: System level
Examples
# Enable the IGMP SSM mapping feature on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] igmp ssm-mapping enable
igmp startup-query-count
Use igmp startup-query-count to configure the startup query count on the current interface.
Use undo igmp startup-query-count to restore the default.