HP VPN Firewall Appliances Network Management Command Reference

601
Views
User view
Default command level
2: System level
Parameters
all: Specifies all interfaces (the first all) or all IGMP groups created based on the configured IGMP SSM
mappings (the second all).
interface-type interface-number: Specifies an interface by its type and number.
group-address: Specifies a multicast group by its IP address, in the range of 224.0.0.0 to
239.255.255.255.
source-address: Specifies a multicast source by its IP address.
mask: Specifies the mask of the multicast group address or multicast source address, 255.255.255.255
by default.
mask-length: Specifies the mask length of the multicast group address or multicast source address. For a
multicast group address, this argument has an effective value range of 4 to 32. For a multicast source
address, this argument has an effective value range of 0 to 32. For both cases, the default value is 32.
Examples
# Clear all multicast group information created based on the configured IGMP SSM mappings on all
interfaces on the public network.
<Sysname> reset igmp ssm-mapping group all
Related commands
display igmp ssm-mapping group
robust-count (IGMP view)
Use robust-count to configure the IGMP querier's robustness variable globally.
Use undo robust-count to restore the default.
Syntax
robust-count robust-value
undo robust-count
Default
The IGMP querier's robustness variable is 2.
Views
Public network IGMP view
Default command level
2: System level
Parameters
robust-value: Specifies an IGMP querier's robustness variable, in the range of 2 to 5.