HP VPN Firewall Appliances Network Management Command Reference

610
c-bsr (PIM view)
Use c-bsr to configure the specified interface as a C-BSR.
Use undo c-bsr to remove the related C-BSR configuration.
Syntax
c-bsr interface-type interface-number [ hash-length [ priority ] ]
undo c-bsr
Default
No C-BSR is configured.
Views
Public network PIM view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
hash-length: Specifies a hash mask length, in the range of 0 to 32. If you do not specify this argument,
the corresponding global setting is used.
priority: Specifies the priority of the C-BSR, in the range of 0 to 255. A larger value indicates a higher
priority. If you do not specify this argument, the corresponding global setting is used.
Usage guidelines
PIM-SM must be enabled on the interface that you want to configure as a C-BSR.
Examples
# Configure GigabitEthernet 0 1/1 to be a C-BSR on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-bsr gigabitethernet 0/1
Related commands
• c-bsr hash-length
• c-bsr priority
• c-rp
• pim sm
c-bsr admin-scope (PIM view)
Use c-bsr admin-scope to enable administrative scoping.
Use undo c-bsr admin-scope to disable administrative scoping.
Syntax
c-bsr admin-scope
undo c-bsr admin-scope